Description
Technical data
Technical data |
Value |
Displacement (cc) |
55.5 |
Power output (kW) |
2.8 |
Weight (kg / lbs) 1) |
5.6 / 12.3 |
Weight (kg / lb) |
5.6 / 12.3 |
Guide Bar Lengths (Recommended ranges) |
16″ – 20″ |
Chain Oil Capacity (oz) |
8.12 |
Fuel Capacity (oz) |
16.9 |
Chain |
23RS67E (16″) / 23RS74E (18″) / 23RS80E (20″) |
Power output (kW) |
2.8 |
Standard Features
STIHL anti-vibration system
Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.
Single-lever master control
All important functions such as start, choke, throttle and stop are operated via a single lever.
Tool free fuel caps
Special caps to open and close the tank cap quickly, easily and without tools.
Side-mounted chain tensioning
The tensioning screw can be found on the side of chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.